tritrophy

• 
  1982-1988 Automatic Transmission Bearing-Main and Auxilliary Shaft Left 73-82-202-25 420 500 430 $13.77
• 
  1982-1988 Plus 1981 430 Husqvarna BIG END CRANKSHAFT PIN 58 mm x 25.03 mm $37.77
• 
  1982-1988 WHEEL SEAL, Rear Wheel 15-13-718-01 $5.77
• 
  1983 1985 1987 Husqvarna 3rd Gear on L/S 26 Teeth 16-12-387-01 EXCL USED $21.77
• 
  1983 Husqvarna 175 AIR COOLED Engine Seal Set with VITON Main Seals $41.77
• 
  1983 Husqvarna 250CR 5th/6th Gear on M/S 25/27 teeth 16-12-389-01 NOS $36.77
• 
  1983-1984 Husqvarna 125 AIR COOLED Engine Seal Set with VITON Main Seals $41.77
• 
  1983-1986 (and 87) HUSQVARNA 125 CONNECTING ROD KIT fits 83-86 All Models and 87WR 16-10-383-01 $234.77
• 
  1983-1987 4th Gear on L/S 24 teeth 16-12-388-01 USED VG+ $29.77
• 
  1984 1985 HUSQVARNA 500AE AUTOMATIC 500 AUTO GASKET SET 16-19-850-01 $69.77
• 
  1984 Husqvarna Air Cooled 250 500 Engine Seal Set VITON Mains + Other Seals $39.77
• 
  1984 HUSQVARNA CR250 LIQUID COOLED GASKET SET 16-19-851-01 $88.88
• 
  1984 Husqvarna L/C 250CR 400WR Engine Seal Set VITON Mains Waterpump plus Others Seals $49.99
• 
  1984 to 1985 WATERPUMP SHAFT Long Type 16-17-952-01 $32.77
• 
  1984 to 1987 Left Main Bearing, 125 Main Bearing 6204 C3 73-82-204-25 2 Required Sold Each $14.77
• 
  1984 to 1988 Husqvarna 3rd Gear on Layshaft 16-12-386-01 NOS Out of stock
• 
  1984 to 1988 WATERPUMP BEARING Use for Both 738219800 and 738219804 $9.77
• 
  1984 WATERPUMP BEARING and SEAL KIT $31.77
• 
  1984-1985 Husqvarna Auto 500AE Primary Clutch Kit w/Springs NOS NEW 16-19-858-03 $329.77
• 
  1984-1987 HUSQVARNA 250 Liquid Cooled CONNECTING ROD KIT 16-19-825-01 is also 16-19-902-01 $234.77
• 
  1984-1987 HUSQVARNA 400 Liquid Cooled CONNECTING ROD KIT 16-19-825-01 is 16-19-902-01 $234.77
• 
  1984-1988 Husqvarna Auto 500AE and 430AE Primary Clutch DRUM NOS NEW 16-17-015-01 $157.77
• 
  1985 1986 HUSQVARNA AUTO 430AE CONNECTING ROD KIT 16-19-701-01 $234.77
• 
  1985 to 1987 WR and AE Front Axle w/ Nut Welded (Factory) 15-16-351-01 NOS $19.77
• 
  1985 to 1988 Offset Spacing Washer with 6mm Hole Spaces Chain Roller Part # 15-11-313-01 $3.77
• 
  1985 to 1988 Spacer Beside Bearing of Chain Guide Roller 15-11-453-01 $4.77
• 
  1985 to 1988 Spacer Between Roller Bearings with Washers 15-11-311-01 Out of stock
• 
  1985 to 1988 WATERPUMP BEARING and SEAL KIT $36.77
• 
  1985-1988 Husqvarna 250 400 430 500 Engine Seal Set w/ VITON Mains, Waterpump, Other Seals $42.77
• 
  1985-1988 Husqvarna 430AE Engine Seal Set w/VITON Crankshaft Seals and Others $47.77
• 
  1985-1988 HUSQVARNA 430AE AUTO SPRING PRIMARY CLUTCH 9 PACK 16-17-027-01 $57.77
• 
  1985-1988 HUSQVARNA 430AE AUTO SPRING PRIMARY CLUTCH-SET OF 3 is 16-17-027-01 $23.77