tritrophy

• 
  1969-1988 HUSQVARNA STEEL SLEEVE, for Roller at Rear Chain Guide 15-15-413-01 $8.99
• 
  1970 to 1974 Husqvarna LOCK TAB WASHER for Clutch 16-11-995-01 NOS $5.88
• 
  1970-1974 Husqvarna Brake Backing Plate Front Small 6" Hub NEW 15-16-114-01 NOS Out of stock
• 
  1970-78 Front Wheel Axle Spacer 15-16-536-01 New Stainless Steel $16.99
• 
  1972 1973 Husqvarna Engine Seal Set with VITON Mains and Other Seals $51.88
• 
  1972 to 1974 HUSQVARNA 125 Intake Manifold 16-10-726-01 NOS $37.99
• 
  1972 to 1974 Husqvarna SHIFT LEVER USED 16-10-940-02 NOS Out of stock
• 
  1972 to 1988 Husqvarna 125 & 175 VITON Crankshaft Seal Set EXCEPT 1975-76 175 $32.99
• 
  1972-1973 Husqvarna 125 Engine Seal Set has Viton Main Seals $49.99
• 
  1972-1974 Husqvarna Clutch M/S 14 Teeth 6 Spd 16-12-441-01 NOS $99.88
• 
  1972-1975 Husqvarna 125CR Gear 31 teeth 1st on L/S 13mm Thick Dished Back 16-12-406-01 NOS $19.99
• 
  1972-1975 Husqvarna 125CR Gear 31 teeth 1st on L/S 13mm Thick Flat Back 16-12-406-01 NOS $19.99
• 
  1972-1979 Transmission 6301 Bearing-Clutch Shaft Right Sprocket Shaft 73-82-301-40 $13.88
• 
  1972-1979 WHEEL SEAL, Leleu Wheel 15-16-638-01 $6.99
• 
  1972-1982 125 Crankshaft Main Bearing-Left or Right 73-83-204-40 Max Style European Axial Contact Design $37.99
• 
  1972-1988 Husqvarna 125 CRANKSHAFT BIG END BEARING 16-11-533-01 NOT 75-76 175 $37.30
• 
  1972-1988 Husqvarna 125 WRISTPIN BEARING 16-11-534-01 Also 175 except 75-76 $26.99
• 
  1972-1988 Transmission 6303NR Bearing-Sprocket Shaft Left w/ Snap Ring 15-13-720-01 All Models $23.88
• 
  1973-1974 Husqvarna 2nd Gear on M/S Fits 125 250 WR 18 teeth 16-12-451-01 NOS $15.99
• 
  1973-1974 Husqvarna Gear 2nd M/S 125 CR 19 teeth 16-12-402-01 NOS $15.99
• 
  1973-1974 Husqvarna Layshaft Tapered Sprocket, Fits 125 CR/WR 16-12-401-01 NOS $28.99
• 
  1973-1976 & 1982 Husqvarna 125CR 2nd Gear L/S 28 teeth 16-12-407-01 NOS $19.99
• 
  1973-1979 Husqvarna 4th Gear on Layshaft 24 teeth 16-12-409-01 NOS $39.99
• 
  1973-1982 Husqvarna 1st Gear on L/S 33 teeth 16-12-442-01 NOS $19.99
• 
  1973-1982 Husqvarna 5th Gear on L/S 22 teeth 16-12-410-01 NOS $21.99
• 
  1974 & Later 450 460 Husqvarna Engine Seal Set w/ Viton Mains and Other Seals $51.99
• 
  1974 250 360 400 (Not CR250) Husqvarna Engine Seal Set w/ Viton Mains and Other Seals $51.99
• 
  1974 Mag 250 Husqvarna Engine Seal Set VITON MAINS and Other Seals $51.99
• 
  1974 MAG250 thru 1977 Bing to Mikuni Reed Intake Manifold Conversion Set 16-11-742-01 $78.88
• 
  1974 to 1975 ML0001 Series Husqvarna Engine Seal Set VITON MAINS and Other Seals $51.99
• 
  1974-1975 HUSQVARNA 400CR and 400XC CONNECTING ROD KIT 16-10-642-01 $199.88
• 
  1974-1976 Husqvarna 125 Engine Seal Set has Viton Main Seals $49.88