Products

• 
  1977-1979 Husqvarna 360 390 Auto VENT SEAL at Sprocket Cover 16-12-616-01 NOS $11.77
• 
  1977-1979 HUSQVARNA Twin Shock Models Swingarm Protector CHAIN SLIDER 15-10-668-01 $15.77
• 
  1977-1980 390 ALL MODELS and 1976-1982 ALL AUTOS CONNECTING ROD KIT 16-10-642-01 $234.77
• 
  1977-1980 Husqvarna Auto 360 390 Bronze Clutch Brake Shoe NOS 16-12-610-01 $19.77
• 
  1977-1980 Husqvarna Auto 360 390 Engagement Lever for Brake USED VG 16-12-613-01 $12.77
• 
  1977-1980 Husqvarna Auto 360 390 Shaft for Clutch Brake NOS 16-12-611-02 $18.77
• 
  1977-1982 Husqvarna 125 Engine Seal Set has Viton Main Seals $47.77
• 
  1977-1984 HUSQVARNA SWINGARM NEEDLE BEARING & O-RING SET OF 4 15-10-607-01 $79.77
• 
  1977-80 Husqvarna Auto 390 Crankshaft Drive Side End w/Keys NEW NOS 16-11-494-01 $88.77
• 
  1978 1979 Husqvarna 250 OVERHAUL GASKET SET 16-19-805-01 78 79 $79.88
• 
  1978 Husqvarna Auto 390 Drum for Primary Clutch on Crank USED VG 16-12-652-01 $38.77
• 
  1978 Husqvarna AUTOMATIC AUTO 390 AMX ACC GASKET SET 16-19-807-01 $77.77
• 
  1978 to 1984 HUSQVARNA 38mm MIKUNI CARB ADAPTER 250 390 430 NEW 16-13-533-01 $26.77
• 
  1978 to 1984 Husqvarna Brake Shoes FERODO Brand Replacing 15-16-788-02 Wide is 1 1/8" 30mm $54.99
• 
  1978 TO 1988 HUSQVARNA BEARING, STEERING HEAD 15-13-070-01 $39.77
• 
  1978-1979 Husqvarna 250 360 390 Engine Seal Set VITON MAINS & Other Seals $49.88
• 
  1978-1980 Husqvarna 390 390 Auto PISTON RING 2ND OVER BORE 84.0mm 16-10-878-06 $67.77
• 
  1978-1980 Husqvarna 390 390 Auto PISTON RING STANDARD BORE 83.0mm 16-10-878-04 $67.77
• 
  1978-1980 Husqvarna AUTO WASHER BEARING RETAINER NOS 16-12-625-01 $8.77
• 
  1978-1981 250 plus 1977-1980 390 All Models CONNECTING ROD KIT 16-10-642-01 $234.77
• 
  1978-1982 Husqvarna Auto 390 420 Hub for Primary 1st Clutch USED VG 16-12-656-01 $49.77
• 
  1978-88 Husqvarna Auto Drain Plug Trans Oil 390 420 500 430 GOOD USED 16-12-537-01 $9.77
• 
  1979 390 Husky Automatic Engine Seal Set w/ Viton Main Seals 1979 Husqvarna Auto $59.77
• 
  1979 HUSQVARNA 390 ACC GASKET, CYL. BASE (wide pattern) 16-11-763-01 $14.77
• 
  1979 to 1984 BEARING SKF 626, Chain Tensioner 2 Required, Sold Each 738229619 $13.77
• 
  1979 to 1984 Chain Tensioner Bearing Spacer Between Roller Bearings 15-15-455-01 $8.77
• 
  1979 to 1984 Chain Tensioner Flat Aluminum Arm 15-15-452-01 $8.77
• 
  1979 to 1984 Chain Tensioner INNER SLEEVE w/ORINGS 15-15-453-01 $18.77
• 
  1979 to 1984 Chain Tensioner Spring ONLY 15-15-454-01 $14.77
• 
  1979 to 1984 Chain Tensioner Spring, Stainless with Wear Sleeve 15-15-454-01 $29.77
• 
  1979-1980 Husqvarna AUTOMATIC AUTO 390 GASKET SET 16-19-809-01 $79.77
• 
  1979-1982 HUSQVARNA 390 420 AUTOMATIC GASKET CENTER CASE 16-11-760-01 $21.77